The Merchandise GuideGarage Eagle Models
Compiled by Martin Willey
The Merchandise GuideJapan 1987-89
"One day copyright at 'Wonder Festivals'" 1/144 scale resin except for vinyl nozzles and plastic fuel tanks. Two different packages. Mentioned Century 21 £10 p33. May be same as Teru "Eagle Boosterised"?
Japan
1/144 scale resin, vinyl and plastic construction kit based on Metamorph Eagle (booster pod, spine boosters and the New Adam New Eve side boosters). See The Gerry Anderson Memorabilia Guide (Dennis Nicholson) p218, Sci Fi and Fantasy Models No 39 p44.
Teru Yamada also produced a Moonbase Alpha, and figures of an astronaut and Zantor.
UK 1990 £5.95
"Supermarionation Mini-Metals" series, number S.M.M.13.
7cm long accurate model of Eagle, cast in white metal with etched brass framwork. Sold unassembled (legs, engines and framework must be added to the main body) and unpainted.
Sold in a bubble pack, with red and black card art (series logo and rescue Eagle over lunar surface, art by Graham Bleathman). The Warp Launch Pad and Hangar Set were built to the same scale.
Two versions of this kit were produced.
UK August/September 1998. £275.00 from Comet Minatures.
22 inch long model, in resin / GRP with turned aluminium engine bells. Accurate decals and detailed instruction sheet. Includes a copy of Roberto Baldassari's ultimate Eagle blueprints and Phil Rae's blueprint reprinted from SIG magazine. Limited edition of 50 copies, later extended to 100 (first batch of 25 released first week of August, second batch at the end of October 1998), and then 200 (in 1999).
The kit was reviewed in the magazine Sci Fi and Fantasy Models #33 (October 1998) p8-10 by Simon Roykirk.
UK November 1999. £1250.00 from Comet Minatures.
44 inch long model, in resin / GRP with turned aluminium engine bells and brass framework. "Accurate" decals and detailed instruction sheet (the parts breakdown is exactly the same as the 22 inch version). The Eagle nose cone is a cast of the third Eagle model, and the side pods and passenger pod cast from David Sisson's replica. Only 25 copies were made. See pictures of completed model, made by Jon Wilson.
|
UK 2000 £49.50; 2003 £65 12" long GRP and white metal kit, with detachable pod and decals. Warp had originally planned to produce a accurising kit for the Ertl Eagle but decided to produce a completely new kit instead. It is the same scale as the Ertl kit and attachments and decals produced by Tangents and Small Art Works may be used with it. Warp plan to release the following attachments:
|
 |
1:144 scale Eagle modelled by Tereu Yamada in Japan. Includes alternative pods and booster unit. The master model, though highly accurate, was not made in a fashion that allowed it to be taken apart for moulding, and it had to be returned to Japan for reworking. Information from Chris Potter
|
Canada 1999, 2000, 2001 (closed for a few months in 1999). Run by Colin Omilusik who produced the patterns for most of the resin kits.
|
 |
|
Canada 1999-2000 Model maker Jim Small's kits modify the MPC/Airfix/Ertl Eagle to match the varied configurations with a high degree of accuracy. |
 |
| Moonbase Alpha | Accurised version of MPC/Ertl kit. $150 |
| Lab pod (booster pod) | Alternative Eagle pod for MPC/Ertl kit - $35; $55 with spine booster set (Metamorph configuration) Starship modeler review |
| Cargo pod (waste pallet/winch pod) | Alternative Eagle pod for MPC/Ertl kit. - $35 |
| Passenger pod (accurate version) | (2000) $35 |
| Eagle hanger diorama | In scale with the Ertl Eagle- from $3 per component |
| Eagle side boosters | (from New Adam New Eve, in scale with the Ertl Eagle) - $29 Starship modeler review |
| Eagle top boosters | (from Metamorph, in scale with the Ertl Eagle) - $25 Starship modeler review |
| Eagle Authentication Kit | $35 Starship modeler review |
| Moonbuggy | Created with a mold of an original 1/24 studio model. $80 |
| Launch Pad | (2000) 26 inch diameter. $175 |
| Kaldorian Spaceship | (2000) 6 inch diameter. $35 |
| Infernal Machine Laser Tanks (set of 3) | (2005) 4.5 inches long each. |
8" x 3" colour sheet of decals for the MPC/Airfix/Ertl Eagle kit (enough -with care- to cover two Eagles).
USA 2001. $300
59cm/ 23" long Eagle Transporter in 70 resin pieces plus metal screws and tubes and ALPS decals. Although the kit quality is better than the AB Models 22inch Eagle, the accuracy was poorer. Construction and painting requires significant model making experience (the instructions are generally regarded as inadequate). The model has been revised several times; initial versions had leg pods similar to the first 44inch studio model, later ones were based on the second 44inch studio model. The model is the basis of the Product Enterprise 23inch Eagle.
|
USA A range of small resin models by Chris Larson.
 Unpainted, assembled models. |
|
The Ultra Probe command module has been a popular product for various garage kit manufacturers, possibly because they could recast an existing replica. Usually these are 1/48, the same as the studio original large Ultra Probe. The module is about 5 inches in length, although following the more detailed 1/24 command module seen in close-up. Garage kit manufacturers include Erasmus (2001, 1/48 scale, $99) and Monsters In Motion (2004) in two versions, 1/48 (8 inches, $99), and 1/24 (16 inches, same as the studio original, $999). Built-up versions are also sold on ebay. Quality is not highly regarded.
Also see Fanderson alien ship models and UNCL laser tank
Copyright Martin Willey